Ireland and other isles at cost.
Please note: For all Sales, Delivery, Installation and Training requirements outside mainland UK please contact us by email or telephone to obtain details of all relevant costs and charges that will be applicable and which will be different from those for within the UK.
Product Details
Straight, horizontal polishing machine for round and flat edges up to 10cm thickness.MODELS AND ACCESSORIES
The standard model of the LTH project is named LTH 721 M.
It is made up of the following mandrels:
- 1 CALIBRATION MANDREL to gauge thickness at an adjustable depth (maximum 6 centimetres). The mandrel can be adjusted both laterally and longitudinally with respect to its supporting shaft; moreover, it can be rotated from 0o to 90o, and can also be used to carry out embeddings for the drip stone.
- 2 OPPOSING MANDRELS INCLINED AT 45° to order chamfers and/or bevelling of various dimensions. Whenever you need to carry out rounded profile edges, these mandrels, thanks to the use of specific diamond cone-trunk grinding wheels greatly helped the following shaping made by the oscillating mandrels by carrying out the milling of the edge.
- 7 OSCILLATING MANDRELS
of which the first two are ready to be equipped with cup-shaped diamond grinding wheels in order to carry out the shaping of the rounded profiles or the grinding of the flat, squared off or inclined profiles . The other five mandrels are equipped with polishing and smoothing abrasive grinding wheels. If necessary all the 7 mandrels can be equipped with abrasive grinding wheels. New models, which derives from the LTH 721 M model with the addition of other mandrels, can be created if requested.
OSCILLATING MANDRELS
(for shaping, smoothing and polishing)
• Quantity: 7 (of which the first two have an adjustable mechanical stop)
• Total power (7 mandrels): 10 Kw
• Rotation speed: 900-2400 rpm
Attachable tools
A) For shaping
• Cup-shaped diamond grinding wheel
• Diameter: 120-150 mm
• Total h: 70 mm
• Attachment: right-hand screw thread M 24x3 (x37)
B) For polishing
• Cup-shaped abrasive grinding wheels
• Diameter: 120-150 mm
• Right-hand standard lead nut attachment
WORK DIRECTION
from right to left (or left to right)
DIMENSIONS OF PROCESSABLE PIECES
• Length: Minimum 270 mm; maximum no limit
• Width: Minimum 200 mm; maximum no limit
• Thickness: Minimum 10 mm; maximum 100 mm
Total Installed Power: 34 Kw
Total Water Consumption: 40 litres/minute
Machine Dimensions (hydraulic unit excluded):
• Length: 4735 mm
• Width: 1995 mm
• Height: 1700 mm
Weight Of Machines 5000 Kilos
Working Speed: 7-80 Metres/hour
